News

What are the steps of inspection before the operation of the titanium reactor?

Before using a titanium reactor, users need to strictly follow the following steps to avoid accidents.

1. The titanium reactor should maintain the cleanliness and visibility of the stirring bearings during use. Bearings connected with round nuts should be regularly checked to see if the rotation direction of the mixing shaft is clockwise and there should be no reverse rotation, otherwise it will affect the equipment.

2. The titanium reactor should also be regularly inspected and mixed inside the tank. Some accessories in the pot should be checked in a timely manner to tighten the bolts. If the bolt is sent out, the relevant components should be changed in a timely manner to avoid affecting the operation of the entire equipment due to certain components.

3. The outlet valve of the titanium reactor should be checked regularly. If there are any problems, they should be dealt with promptly. Both the flange and valve seat components have bolts. Check for looseness, vulnerabilities in shielding, stability, etc. Customers should pay attention to relevant situations when using titanium reactors. They need to use titanium reactor equipment and do not carry out maintenance and inspection work.

4. The titanium reactor should be cleaned regularly, and the equipment should be cleaned appropriately. The titanium reactor should be kept free of oil stains or reactants, so that the equipment of the titanium reactor presents its own characteristics.

The titanium reactor equipment itself also needs attention and inspection, such as whether there are cracks, deformations, bulges, punctures, corrosion, leaks, and whether the titanium reactor is burned out, all of which require regular inspection and maintenance.

[ 上一页 ] Heating method of ...[ 下一页 ] What are the preca...