News

Online diameter measurement of titanium alloy round pipes

Abstract: Titanium alloy round tubes are now very practical. The measurement of titanium alloy round tubes can be carried out accurately online using photoelectric calipers, ensuring measurement accuracy on the production line.

Keywords: Titanium alloy round tube; Unidirectional caliper;

In the production of titanium alloy round pipes, they are formed by multi-stage forming with diameter, high-frequency welding, regular sawing to length, straightening, and finally becoming finished pipes. In modern industrial production, there are certain requirements for the quality and size of finished pipes, and there are also certain specifications for the deviation of the outer diameter size of titanium alloy round pipes.

In traditional methods, manual measurements are often carried out using pallets in production. The online production speed of titanium alloy round pipes can reach tens of meters per minute. In such a high-speed production line, manually measuring the outer diameter size of steel pipes is not only unsafe, but also difficult to accurately measure. If deviations cannot be detected in a timely manner or cannot be accurately measured, a lot of waste will occur, causing significant economic losses.

The photoelectric caliper series products produced by Lanpeng Measurement and Control can solve this problem by achieving online non-contact non-destructive testing of the diameter of titanium alloy round tubes, controlling the diameter of its products. The caliper is equipped with an out of tolerance alarm system, which can provide an out of tolerance on line alarm for the production of titanium alloy round tubes in the production line.

The diameter gauge can automatically measure the outer diameter size of titanium alloy round pipes and display it on the LED display screen in a timely manner. The display screen can also be externally connected to enable production operators to view and correct production process parameters in a timely manner. It can also be equipped with a software system for data analysis and storage, providing accurate data for workers to ensure product production quality, improve production efficiency, and reduce waste generated from raw materials.

The outer diameter dimensions of titanium alloy tubes are different, so various specifications of photoelectric calipers have been developed to meet the needs of rolling production. The measurement range of photoelectric calipers is customized according to the specifications of titanium alloy tubes produced, to meet the online measurement of all titanium alloy tubes in production.

The photoelectric caliper is applied to online measurement of the outer diameter size of titanium alloy circular tubes. The main body of the caliper is installed on the rolling site to ensure online measurement of the outer diameter size. The measurement range can be adjusted for various types of titanium alloy circular tubes.

The photoelectric caliper is applied in the online detection of outer diameter dimensions, achieving high-quality measurement. The measurement range can be customized according to needs. The photoelectric caliper can also be used in various steel rolling sites, such as round steel, alloy steel, carbon steel, etc., for online detection, and can be used for online measurement and offline sampling of wire rods and pipes.

The application of photoelectric caliper in online measurement of titanium alloy round tubes effectively reduces the cost of single piece inspection after production, saves raw material loss, and reduces personnel demand. It can perform online detection on high-temperature titanium alloy round tubes, and the material and temperature of the measured object have no impact on the measurement results. The photoelectric caliper can adapt to various working conditions and display detailed parameters required by the process.

[ 上一页 ] The process of tit...[ 下一页 ] Welding process of...